Tekbox EMCview PC software for EMC pre-compliance testing
Use our chat for personal support. Or contact us via +45 31 33 18 19 or salg@GOmeasure.dk
- numerous pre-configured project files for CISPR-xx (EN550xx) emission measurements
- Graph supports two complete measurement runs, same as in test house
- fast Quasi-Peak scan of critical peaks, immune to frequency drift of the selected peaks
- configurable limit lines and segment files
- configurable correction files for cable, LISN, amplifier, antenna etc.
- configurable margins for the identification and selection of critical peaks
- supports import and overlaying of reference measurements for comparison purpose
- linear or logarithmic frequency axis
- automatic creation of test reports
- many import/export-functions
- RF coverage measurements
- tracking generator control for immunity testing
%20emission%20measurements%0A%20%09Graph%20supports%20two%20complete%20measurement%20runs,%20same%20as%20in%20test%20house%0A%20%09fast%20Quasi-Peak%20scan%20of%20critical%20peaks,...
){kind=link}
Discover the possibilities
More information
Description
The Tekbox EMCview compliance software for PCs is a user-friendly EMC pre-compliance testing of radiated and conducted emissions. It is a perfect complement for automated testing using our LISNs and TEM Cells.
A built-in amplitude correction enables correction and conversion coefficients for cables, amplifiers, attenuators, LISNs, TEM cells, antennas, RF current probes, striplines and capacitive coupling clamps.
There is no need for a time-consuming setup. The SW is ready for measurements straight after installation. All emission related CISPR-xx (EN550xx) measurements and a few automotive manufacturer standards are pre-configured in corresponding project files.
The graph supports two complete measurement runs such as for example Average / Quasi-Peak or Peak / Quasi Peak and alternatively a fast Quasi-Peak scan of critical peaks.
Furthermore, EMCview together with our GPS receiver can be used to carry out RF-coverage measurements. An export feature creates KML files which link the result to google maps.
Immunity testing is supported with a menu controlling the tracking generator of the spectrum analyzer
EMCview currently supports the following spectrum analyzers
- Rigol (DSA and RSA)
- Siglent (SSA/SSA plus/SSA -R and SVA) Siglent EU, Siglent USA
- R&S (FPC and FPH)
- OWON XSA and HSA
- Teledyne Test Tools T3SA series
- BK Precision 2683 series
For more information: Tekbox
Documents
Options
Video
The Tekbox EMCview compliance software for PCs is a user-friendly EMC pre-compliance testing of radiated and conducted emissions. It is a perfect complement for automated testing using our LISNs and TEM Cells.
A built-in amplitude correction enables correction and conversion coefficients for cables, amplifiers, attenuators, LISNs, TEM cells, antennas, RF current probes, striplines and capacitive coupling clamps.
There is no need for a time-consuming setup. The SW is ready for measurements straight after installation. All emission related CISPR-xx (EN550xx) measurements and a few automotive manufacturer standards are pre-configured in corresponding project files.
The graph supports two complete measurement runs such as for example Average / Quasi-Peak or Peak / Quasi Peak and alternatively a fast Quasi-Peak scan of critical peaks.
Furthermore, EMCview together with our GPS receiver can be used to carry out RF-coverage measurements. An export feature creates KML files which link the result to google maps.
Immunity testing is supported with a menu controlling the tracking generator of the spectrum analyzer
EMCview currently supports the following spectrum analyzers
- Rigol (DSA and RSA)
- Siglent (SSA/SSA plus/SSA -R and SVA) Siglent EU, Siglent USA
- R&S (FPC and FPH)
- OWON XSA and HSA
- Teledyne Test Tools T3SA series
- BK Precision 2683 series
For more information: Tekbox