Pendulum P150 High Voltage High Current Linear Amplifier
Use our chat for technical support or contact us via +45 31 33 18 19 or salg@GOmeasure.dk
The Pendulum Instruments Variable Gain High Speed Linear Amplifier F30PV is a very fast general purpose linear amplifier having a variable amplification of 0-10 times and capable of bipolar voltage output of ±35V. The amplifier has an attenuator at the input. At the knob position “10” the amplification is equal to 10x. Standard value is 500 ohm, but other values like 50 ohm, 1kohm, etc., can be fitted in on request. Any signal source with amplitude within ±3.5 V can be used as an input device. A typical output voltage range of a function generator will not harm the amplifier but the input protection network will limit the signal amplitude to ±3.5 V (after attenuator) and may cause clipping. The Variable Gain High Speed Linear Amplifier F30PV is equipped with a microfuse rated at 15 mA, which will be blown if the input voltage exceeds 300% of the maximum.
Discover the possibilities
More information
Description
Pendulum P150 High Voltage High Current Linear Amplifier
The High Voltage High Current Linear Amplifier P150 is equipped with a microfuse rated at 15 mA, which will be blown if the input voltage exceeds 300% of the maximum.
The slew rate is set at the factory to 30 V/µs which yields the load limit of 100 nF. The continuous output current limit is 1 A and the output power limit is ca 125 W.
Frequency response
High and small-signal frequency responses without load (red and orange marks respectively) and with 100 nF load (blue and green marks respectively) are shown in the diagram below:
Specifications
Documents
Pendulum Variable Gain High Speed Linear Amplifier F30PV
Pendulum Variable Gain High Speed Linear Amplifier F30PV datasheet
Options
Video
Pendulum P150 High Voltage High Current Linear Amplifier
The High Voltage High Current Linear Amplifier P150 is equipped with a microfuse rated at 15 mA, which will be blown if the input voltage exceeds 300% of the maximum.
The slew rate is set at the factory to 30 V/µs which yields the load limit of 100 nF. The continuous output current limit is 1 A and the output power limit is ca 125 W.
Frequency response
High and small-signal frequency responses without load (red and orange marks respectively) and with 100 nF load (blue and green marks respectively) are shown in the diagram below:Pendulum Variable Gain High Speed Linear Amplifier F30PV
Pendulum Variable Gain High Speed Linear Amplifier F30PV datasheet