Pendulum CNT-102 Multi-Channel Frequency Analyzer
Use our chat for personal support. Or contact us via +45 31 33 18 19 or salg@GOmeasure.dk
- Dual-channel 400 MHz Frequency Analyzer - plus optional RF-channel up to 24 GHz
- Measurement modes:
- 2 parallel counters in one box - Gap-free zero-dead-time frequency/period/TIE measurements
- Very-high resolution:
- Time: 14 ps
- Freq.: 12-13 digits/s - Very high meas. speed:
- 1M meas./s to internal memory - Fast bus speed;
- 170k meas/s in block mode - Graphic touch screen display for settings and display of values, statistics (numeric and distribution graph), trend & modulation domain
- The instrument can be controlled locally via touch screen or mouse, or remotely (from anywere in the world) - via web interface or VNC
Discover the possibilities
More information
Description
Overview
The Pendulum CNT-102 is a new affordable model in the CNT-100 family for super-performance Multi-channel frequency and time-interval analysis in a bench-top unit. You can track parallel frequency, phase, or time simultaneously on 2 input channels on the large graphic screen. These instruments feature gap-free measurements, and have 14 ps resolution, up to 13 digits/s frequency resolution, and a measuring speed of 1M results/s. CNT-102 outperforms any competing Timer/Counter/Analyzer on the market.
For even higher performance, please check our CNT-104S, a 4-input Multi-channel Frequency Analyzer with 7ps resolution and a speed of up to 20MSa/s.
High-performance: 2-channel, ultra-high speed and 14 ps resolution
The very-high single-shot resolution gives better insights into the design under test, faster results in phase comparisons between clocks, more accurate calibration, and allows capture of very small time/phase changes. Track and compare 2 parallel signals with 14 ps resolution/timestamp, at a speed of 1µs between samples in each channel.
Gap-free, zero-dead-time counting provides back-to-back measurements without losing any cycle, even for very long measurements. The CNT-102 is also a high-performance Modulation Domain Analyzer (MDA). Thanks to the high speed of one million samples/s on 2 parallel signals, very fast frequency or phase/time changes can be captured in real time. CNT-102 has a unique parallel and independent 2-channel design, plus an optional RF input going up to 24 GHz. Both 400 MHz channels perform parallel, independent, and gap-free time-stamping of the input signal. This allows for new measurements that earlier required many instruments, like phase comparison of 2 atomic clocks, without the need for a switch. Or comparing frequency or any pulse parameter simultaneously in two different test points, without any second instrument or moving any test cable or probe.
Save money in production test
The 2-channel design enables 2 parallel frequency measurements. One CNT-102 can replace 2 existing frequency counters in a test system at a lower cost/counter.
Using the option 22/05 rackmount adapter, you will have 4 parallel frequency counters in a 19”, 2U high rack space. You can choose between Ethernet, WLAN*, or USB** as a communication interface to a PC/Laptop/Tablet, or to the test system controller.
High bus speed reduces test time in ATE test systems. Perform fast block measurements up to 170k meas/s. Test time is reduced compared to existing solutions, and time is money.
* Requires an external USB WiFi dongle
** Later availability. USB full SW functionality will be available as future SW upgrades for early purchased units
Outstanding ease-of-use – color touch screen and intuitive menus
The big color touch screen with its intuitive menus, lets you make your settings via a simple finger touch. Alternatively, you can connect a wireless mouse to the front USB host port and make your settings via mouse clicks on the screen instead. Or you can use the web-server interface to control CNT-102 from a large PC-screen.
The intelligent AUTO SET will help you to make the best settings for each measurement function. You do not even need to be close to your instrument. The web server functionality lets you connect to the CNT-102 over Ethernet, view the front panel, control the measurements, and read results via a few mouse clicks. When adjusting a frequency source to given limits, the graphic display gives fast and accurate visual calibration guidance.
You can pan and zoom in graphs to view individual samples with cursor read-outs. Any measured signal can be smoothed, to reveal underlying trends in the presence of excessive noise.
The NEW CNT-102 Multi-channel Frequency Analyzer outperforms every existing benchtop frequency counter and time interval analyzer, except “big brother” CNT-104S, independent of the measurement task.
Full flexibility for remote control
The CNT-102 comes as standard with a Gbit Ethernet interface for remote control and data transfer. Using a WiFi dongle in the front panel USB port, enables you to connect CNT-102 to your local wireless network. A USB 2.0 communication interface is HW ready from the start, with later full SW capabilities, via free future SW upgrade. You can access and control the instrument from your lab bench, or from anywhere in the world, using the integrated web server.
Very flexible configuration
The CNT-102 can be configured as you like to fit performance demands and/or budget. You can add an optional extra channel C for RF frequency measurements. Choose either a 3, or 10 GHz basic HW (the 10 GHz channel is SW key upgradable to 15, 20, or 24 GHz).
Choose between 3 timebase oscillator options; TCXO and 2x OCXO.
Add an optional 0.5 Hz to 100 MHz pulse generator (SW license key).
Add optional TIE measurement function (SW license key).
Easy-to-understand Graphical Presentation
One of the great features of the CNT-102 is the graphic display with its menu-oriented settings. The non-expert can easily make correct settings without risking costly mistakes. Valuable signal information, given in multi-parameter displays, removes the need for other instruments like DVM’s and Scopes for quick signal verification. Measured values are presented as both numerics and graphics. The graphical presentation of results (distribution, trends etc.) gives a better understanding of the nature of jitter. It also provides you with a much better view of changes vs time, from slow drift to fast modulation. The same data set can be viewed in Numeric, Statistics, Distribution and Time-line views. It is very easy to capture and toggle between views of the same data set.
Compare 2 signals simultaneously on screen, with statistics parameters below. 2 instruments in one!
Modulation Domain Analysis
The CNT-102 features built-in modulation domain analysis, displaying frequency changes vs. time, on one to four input channels. Thanks to the high resolution, and the high measurement speed of down to 1µs between individual samples in each channel, you can follow and verify for example:
- FM, FSK, BPSK, PWM, PPM and other time, phase, or frequency modulation schemes
- Frequency sweep
- Frequency transients
- Frequency settling in oscillators, VCOs and PLLs
- Synthesizer switching
- Frequency instability, incl. jitter
View fast FM, or any time/phase/frequency modulation, on screen, on one or two channels. Here we see FM modulation with both sine and square wave shape
For more information: Pendulum
Documents
Datasheet:
Options
Video
Overview
The Pendulum CNT-102 is a new affordable model in the CNT-100 family for super-performance Multi-channel frequency and time-interval analysis in a bench-top unit. You can track parallel frequency, phase, or time simultaneously on 2 input channels on the large graphic screen. These instruments feature gap-free measurements, and have 14 ps resolution, up to 13 digits/s frequency resolution, and a measuring speed of 1M results/s. CNT-102 outperforms any competing Timer/Counter/Analyzer on the market.
For even higher performance, please check our CNT-104S, a 4-input Multi-channel Frequency Analyzer with 7ps resolution and a speed of up to 20MSa/s.
High-performance: 2-channel, ultra-high speed and 14 ps resolution
The very-high single-shot resolution gives better insights into the design under test, faster results in phase comparisons between clocks, more accurate calibration, and allows capture of very small time/phase changes. Track and compare 2 parallel signals with 14 ps resolution/timestamp, at a speed of 1µs between samples in each channel.
Gap-free, zero-dead-time counting provides back-to-back measurements without losing any cycle, even for very long measurements. The CNT-102 is also a high-performance Modulation Domain Analyzer (MDA). Thanks to the high speed of one million samples/s on 2 parallel signals, very fast frequency or phase/time changes can be captured in real time. CNT-102 has a unique parallel and independent 2-channel design, plus an optional RF input going up to 24 GHz. Both 400 MHz channels perform parallel, independent, and gap-free time-stamping of the input signal. This allows for new measurements that earlier required many instruments, like phase comparison of 2 atomic clocks, without the need for a switch. Or comparing frequency or any pulse parameter simultaneously in two different test points, without any second instrument or moving any test cable or probe.
Save money in production test
The 2-channel design enables 2 parallel frequency measurements. One CNT-102 can replace 2 existing frequency counters in a test system at a lower cost/counter.
Using the option 22/05 rackmount adapter, you will have 4 parallel frequency counters in a 19”, 2U high rack space. You can choose between Ethernet, WLAN*, or USB** as a communication interface to a PC/Laptop/Tablet, or to the test system controller.
High bus speed reduces test time in ATE test systems. Perform fast block measurements up to 170k meas/s. Test time is reduced compared to existing solutions, and time is money.
* Requires an external USB WiFi dongle
** Later availability. USB full SW functionality will be available as future SW upgrades for early purchased units
Outstanding ease-of-use – color touch screen and intuitive menus
The big color touch screen with its intuitive menus, lets you make your settings via a simple finger touch. Alternatively, you can connect a wireless mouse to the front USB host port and make your settings via mouse clicks on the screen instead. Or you can use the web-server interface to control CNT-102 from a large PC-screen.
The intelligent AUTO SET will help you to make the best settings for each measurement function. You do not even need to be close to your instrument. The web server functionality lets you connect to the CNT-102 over Ethernet, view the front panel, control the measurements, and read results via a few mouse clicks. When adjusting a frequency source to given limits, the graphic display gives fast and accurate visual calibration guidance.
You can pan and zoom in graphs to view individual samples with cursor read-outs. Any measured signal can be smoothed, to reveal underlying trends in the presence of excessive noise.
The NEW CNT-102 Multi-channel Frequency Analyzer outperforms every existing benchtop frequency counter and time interval analyzer, except “big brother” CNT-104S, independent of the measurement task.
Full flexibility for remote control
The CNT-102 comes as standard with a Gbit Ethernet interface for remote control and data transfer. Using a WiFi dongle in the front panel USB port, enables you to connect CNT-102 to your local wireless network. A USB 2.0 communication interface is HW ready from the start, with later full SW capabilities, via free future SW upgrade. You can access and control the instrument from your lab bench, or from anywhere in the world, using the integrated web server.
Very flexible configuration
The CNT-102 can be configured as you like to fit performance demands and/or budget. You can add an optional extra channel C for RF frequency measurements. Choose either a 3, or 10 GHz basic HW (the 10 GHz channel is SW key upgradable to 15, 20, or 24 GHz).
Choose between 3 timebase oscillator options; TCXO and 2x OCXO.
Add an optional 0.5 Hz to 100 MHz pulse generator (SW license key).
Add optional TIE measurement function (SW license key).
Easy-to-understand Graphical Presentation
One of the great features of the CNT-102 is the graphic display with its menu-oriented settings. The non-expert can easily make correct settings without risking costly mistakes. Valuable signal information, given in multi-parameter displays, removes the need for other instruments like DVM’s and Scopes for quick signal verification. Measured values are presented as both numerics and graphics. The graphical presentation of results (distribution, trends etc.) gives a better understanding of the nature of jitter. It also provides you with a much better view of changes vs time, from slow drift to fast modulation. The same data set can be viewed in Numeric, Statistics, Distribution and Time-line views. It is very easy to capture and toggle between views of the same data set.
Compare 2 signals simultaneously on screen, with statistics parameters below. 2 instruments in one!
Modulation Domain Analysis
The CNT-102 features built-in modulation domain analysis, displaying frequency changes vs. time, on one to four input channels. Thanks to the high resolution, and the high measurement speed of down to 1µs between individual samples in each channel, you can follow and verify for example:
- FM, FSK, BPSK, PWM, PPM and other time, phase, or frequency modulation schemes
- Frequency sweep
- Frequency transients
- Frequency settling in oscillators, VCOs and PLLs
- Synthesizer switching
- Frequency instability, incl. jitter
View fast FM, or any time/phase/frequency modulation, on screen, on one or two channels. Here we see FM modulation with both sine and square wave shape
For more information: Pendulum