Anritsu MS2690A Signal Analyzer
Use our chat for personal support. Or contact us via +45 31 33 18 19 or salg@GOmeasure.dk
- Frequency range: 50 Hz to 6 GHz
- Analysis bandwidth - 31.25 MHz (standard) - 62.5 MHz/125 MHz (option)
- Supports 5G NR (sub-6 GHz) TDD/FDD Wide measurement dynamic range EVM performance: <0.5% One-button dynamic-range optimization at EVM measurement
- Offers modulation analysis, such as LTE/LTE-Advanced (FDD/TDD), WLAN IEEE 802.11ac etc. (with optional software)
- One-Box Tester with the addition of the Signal Generator option
- Batch capture measurements for the fastest analysis time
- Supports Noise Figure measurement (option)
%0A-%2062.5%20MHz/125%20MHz%20(option)%0A%20%09Supports%205G%20NR%20(sub-6%20GHz)%20TDD/FDD%0AWide%20measurement%20dynamic%20range%20EVM%20performance:%20%26lt;0...
){kind=link}
Discover the possibilities
More information
Description
Anritsu MS2690A Signal Analyzer
Signal Analysis will never be the same again
The Anritsu MS2690A is a part of the MS269xA Series Signal Analyzers are the latest high performance signal analyzers for next-generation communication applications. The MS269xA Series Signal Analyzer base units include swept spectrum analysis, FFT signal analysis, and a precision digitizer function. Add options to incorporate a Signal Generator, to turn the instrument into a hassle free, plug and play, one box solution.The MS269xA Series Signal Analyzers support a standard analysis bandwidth of 31.25 MHz that can be extended to 62.5 MHz/125 MHz/162.5 MHz with optional hardware. Using a patented calibration process, the multipoint amplitude calibration and the phase calibration result in a level accuracy of ±0.5 dB across a 6 GHz span. No other analyzer on the market can meet that specification. These boxes are superlative in every way -- they measure the widest signals and using the latest technology, make measurements faster than ever before. The modular architecture ensures a box that grows as measurement requirements change.
A series of options enables standards-based modulation analysis, vector signal generation, BER measurement and Noise Figure measurement. The end-user can configure a one-box solution that dramatically reduces cost, footprint, and Total Average Cycle Time (TACT) for device evaluation.
The MS269xA Series are accurate enough for the most demanding R&D environment, yet are fast enough for the factory floor! Currently supported applications include GSM, GPRS, EDGE, W-CDMA, and WLAN IEEE 802.11a/b/g/j/n/p/ac, etc. , LTE/LTE-Advanced (FDD/TDD), 5G.
The wideband FFT signal analyzer (analysis bandwidth of 31.25 MHz with option for 62.5 MHz/125 MHz/162.5 MHz) supports high-speed continuous measurements including CCDF, frequency vs. time, spectrum, and power vs. time analysis. The standard digitizing function can capture waveforms and immediately play them out using the optional Signal Generator. An extended digitizer option adds the ability to capture signals up to 20 MHz wide for up to 4 hours.
For more information: Anritsu
Documents
Anritsu MS2690A Signal Analyzer
Anritsu MS2690A DatasheetOptions
Anritsu MS2690A Signal Analyzer
| Communication System | Applicable Software |
|---|---|
| Basic Digital Signal Analysis | Vector Modulation Analysis Software |
| 5G NR (TDD) (UPDATED) | 5G NR TDD sub-6GHz Downlink Measurement Software 5G NR TDD sub-6GHz Uplink Measurement Software |
| LTE/LTE-Advanced (FDD) | LTE Downlink Measurement Software LTE-Advanced FDD Downlink Measurement Software LTE Uplink Measurement Software LTE-Advanced FDD Uplink Measurement Software LTE IQproducer LTE-Advanced FDD Option |
| LTE/LTE-Advanced (TDD) | LTE TDD Downlink Measurement Software LTE-Advanced TDD Downlink Measurement Software LTE TDD Uplink Measurement Software LTE-Advanced TDD Uplink Measurement Software LTE TDD IQproducer LTE-Advanced TDD Option |
| GSM/EDGE W-CDMA/HSPA/HSPA Evolution | GSM/EDGE Measurement Software EDGE Evolution Measurement Software W-CDMA/HSPA Downlink Measurement Software W-CDMA/HSPA Uplink Measurement Software HSDPA/HSUPA IQproducer |
| W-CDMA BTS | W-CDMA BS Measurement Software |
| CDMA2000/1xEV-DO | EV-DO Forward Link Measurement Software All Measure Function CDMA2000 Forward Link Measurement Software All Measure Function |
| TD-SCDMA | TD-SCDMA Measurement Software |
| WLAN | WLAN (802.11) Measurement Software 802.11ac (160 MHz) Measurement Software WLAN IQproducer 802.11ac (80 MHz) Option |
| TDMA Type (PHS, ETC/DSRC, Digital LMR etc.) | TDMA IQproducer |
| ETC/DSRC | ETC/DSRC Measurement Software |
| Composite Waveforms for Signal Generator Option | Multi-Carrier IQproducer |
| Hardware Options | Remarks |
|---|---|
| Rubidium Reference Oscillator | Aging rate ±1 × 10- 10/month |
| Wideband Analysis Hardware | Extends the analysis bandwidth to 125 MHz |
| Analysis Bandwidth Extension | Extends the analysis bandwidth to 62.5 MHz/125 MHz |
| 6 GHz Preamplifier | 100 kHz to 6 GHz |
| Vector Signal Generator | 125 MHz to 6 GHz |
| Extension of Preselector Lower Limit to 3 GHz | Extends lower limit of pre-selector to 3 GHz |
| Noise Figure Measurement Function | Y-factor method using a noise source |
Video
Anritsu MS2690A Signal Analyzer
Signal Analysis will never be the same again
The Anritsu MS2690A is a part of the MS269xA Series Signal Analyzers are the latest high performance signal analyzers for next-generation communication applications. The MS269xA Series Signal Analyzer base units include swept spectrum analysis, FFT signal analysis, and a precision digitizer function. Add options to incorporate a Signal Generator, to turn the instrument into a hassle free, plug and play, one box solution.The MS269xA Series Signal Analyzers support a standard analysis bandwidth of 31.25 MHz that can be extended to 62.5 MHz/125 MHz/162.5 MHz with optional hardware. Using a patented calibration process, the multipoint amplitude calibration and the phase calibration result in a level accuracy of ±0.5 dB across a 6 GHz span. No other analyzer on the market can meet that specification. These boxes are superlative in every way -- they measure the widest signals and using the latest technology, make measurements faster than ever before. The modular architecture ensures a box that grows as measurement requirements change.
A series of options enables standards-based modulation analysis, vector signal generation, BER measurement and Noise Figure measurement. The end-user can configure a one-box solution that dramatically reduces cost, footprint, and Total Average Cycle Time (TACT) for device evaluation.
The MS269xA Series are accurate enough for the most demanding R&D environment, yet are fast enough for the factory floor! Currently supported applications include GSM, GPRS, EDGE, W-CDMA, and WLAN IEEE 802.11a/b/g/j/n/p/ac, etc. , LTE/LTE-Advanced (FDD/TDD), 5G.
The wideband FFT signal analyzer (analysis bandwidth of 31.25 MHz with option for 62.5 MHz/125 MHz/162.5 MHz) supports high-speed continuous measurements including CCDF, frequency vs. time, spectrum, and power vs. time analysis. The standard digitizing function can capture waveforms and immediately play them out using the optional Signal Generator. An extended digitizer option adds the ability to capture signals up to 20 MHz wide for up to 4 hours.
For more information: Anritsu
Anritsu MS2690A Signal Analyzer
Anritsu MS2690A DatasheetAnritsu MS2690A Signal Analyzer
| Communication System | Applicable Software |
|---|---|
| Basic Digital Signal Analysis | Vector Modulation Analysis Software |
| 5G NR (TDD) (UPDATED) | 5G NR TDD sub-6GHz Downlink Measurement Software 5G NR TDD sub-6GHz Uplink Measurement Software |
| LTE/LTE-Advanced (FDD) | LTE Downlink Measurement Software LTE-Advanced FDD Downlink Measurement Software LTE Uplink Measurement Software LTE-Advanced FDD Uplink Measurement Software LTE IQproducer LTE-Advanced FDD Option |
| LTE/LTE-Advanced (TDD) | LTE TDD Downlink Measurement Software LTE-Advanced TDD Downlink Measurement Software LTE TDD Uplink Measurement Software LTE-Advanced TDD Uplink Measurement Software LTE TDD IQproducer LTE-Advanced TDD Option |
| GSM/EDGE W-CDMA/HSPA/HSPA Evolution | GSM/EDGE Measurement Software EDGE Evolution Measurement Software W-CDMA/HSPA Downlink Measurement Software W-CDMA/HSPA Uplink Measurement Software HSDPA/HSUPA IQproducer |
| W-CDMA BTS | W-CDMA BS Measurement Software |
| CDMA2000/1xEV-DO | EV-DO Forward Link Measurement Software All Measure Function CDMA2000 Forward Link Measurement Software All Measure Function |
| TD-SCDMA | TD-SCDMA Measurement Software |
| WLAN | WLAN (802.11) Measurement Software 802.11ac (160 MHz) Measurement Software WLAN IQproducer 802.11ac (80 MHz) Option |
| TDMA Type (PHS, ETC/DSRC, Digital LMR etc.) | TDMA IQproducer |
| ETC/DSRC | ETC/DSRC Measurement Software |
| Composite Waveforms for Signal Generator Option | Multi-Carrier IQproducer |
| Hardware Options | Remarks |
|---|---|
| Rubidium Reference Oscillator | Aging rate ±1 × 10- 10/month |
| Wideband Analysis Hardware | Extends the analysis bandwidth to 125 MHz |
| Analysis Bandwidth Extension | Extends the analysis bandwidth to 62.5 MHz/125 MHz |
| 6 GHz Preamplifier | 100 kHz to 6 GHz |
| Vector Signal Generator | 125 MHz to 6 GHz |
| Extension of Preselector Lower Limit to 3 GHz | Extends lower limit of pre-selector to 3 GHz |
| Noise Figure Measurement Function | Y-factor method using a noise source |