Tektronix TDSUSBF USB compliance test fixture
Use our chat for personal support. Or contact us via +45 31 33 18 19 or salg@GOmeasure.dk
The TDSUSBF fixture is shipped as a single circuit board and is organized into three sections:
- High Speed Signal Quality and TDR
- Low/Full Speed Signal Quality and Inrush Current
- An active load for droop testing and eight switchable 100 mA/500 mA passive loads and a dynamic 2 Hz switching 100 mA load.
Discover the possibilities
More information
Description
Tektronix TDSUSBF USB compliance test fixture
TDSUSBF is a USB 2.0 test fixture setThe TDSUSBF compliance test fixture is a companion product for use with the TDSUSB Universal Serial Bus (USB 2.0) Compliance Test Package. The TDSUSBF enables high quality compliance level measurements of the USB 2.0 devices, hosts and hubs. The test fixture supports tests that measure high, full and low speed signal quality. It also supports inrush, droop, receiver sensitivity, packet parameter, suspend, resume, reset, and impedance measurements. All are mandatory for USB 2.0 compliance.
The fixture is shipped as a single circuit board and is organized into three sections:
- High Speed Signal Quality and TDR
- Low/Full Speed Signal Quality and Inrush Current
- An active load for droop testing and eight switchable 100 mA/500 mA passive loads and a dynamic 2 Hz switching 100 mA load.
The boundary between these sections is scored so that you can snap these sections apart for convenience.
You can use the TDSUSBF with the Tektronix TDSUSB2 USB Compliance Test fixture which can be ordered either as Option USB for the DPO7000, TDS5000B, TDS6000B/C, or TDS7000B series, or as an upgrade to these oscilloscopes. Refer to the TDSUSB2 data sheet on www.tektronix.com for specific compatibility information.
Documents
Tektronix TDSUSBF USB compliance test fixture
Tektronix TDSUSBF ManualOptions
Video
Tektronix TDSUSBF USB compliance test fixture
TDSUSBF is a USB 2.0 test fixture setThe TDSUSBF compliance test fixture is a companion product for use with the TDSUSB Universal Serial Bus (USB 2.0) Compliance Test Package. The TDSUSBF enables high quality compliance level measurements of the USB 2.0 devices, hosts and hubs. The test fixture supports tests that measure high, full and low speed signal quality. It also supports inrush, droop, receiver sensitivity, packet parameter, suspend, resume, reset, and impedance measurements. All are mandatory for USB 2.0 compliance.
The fixture is shipped as a single circuit board and is organized into three sections:
- High Speed Signal Quality and TDR
- Low/Full Speed Signal Quality and Inrush Current
- An active load for droop testing and eight switchable 100 mA/500 mA passive loads and a dynamic 2 Hz switching 100 mA load.
The boundary between these sections is scored so that you can snap these sections apart for convenience.
You can use the TDSUSBF with the Tektronix TDSUSB2 USB Compliance Test fixture which can be ordered either as Option USB for the DPO7000, TDS5000B, TDS6000B/C, or TDS7000B series, or as an upgrade to these oscilloscopes. Refer to the TDSUSB2 data sheet on www.tektronix.com for specific compatibility information.