Hioki PW6001 Power Analyzer

Sale price0,00 kr Price on quotation

Use our chat for personal support. Or contact us via +45 31 33 18 19 or salg@GOmeasure.dk

  • Power analyzer
  • +/-0.02% accuracy
  • wide-band DC
  • 0.1 Hz to 2 MHz
  • DC or 1P2W to 3P4W measurements
  • 1ch

Discover the possibilities

More information

Hioki PW6001 Power Analyzer

Hioki benchtop power meters and power analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy.

The PW6001 is Hioki’s flagship power analyzer, featuring high accuracy, wide band, and high stability for measuring electrical power from DC to inverter frequencies, providing maximum of 12 channels (*1) to support single- and three-phase inverter motor system measurements and next generation devices such as silicon-carbide (SiC) inverters.


Basic specifications

Accuracy guaranteed for 6 months, multiply the 6-month accuracy by 1.5 to obtain the 1-year accuracy.

Measurement line typeSingle-phase 2-wire, single-phase 3-wire, three-phase 3-wire, three-phase 4-wire
Number of input channelsMax. 6 channels; each input unit provides 1 channel for simultaneous voltage and current input \n(Voltage measurement unit: Photoisolated input, resistance voltage divider, Current measurement unit: Isolated input from current sensor)
Measurement itemsVoltage (U), current (I), active power (P), apparent power (S), reactive power (Q), power factor (λ), phase angle (φ), frequency (f), efficiency (η), loss (Loss), voltage ripple factor (Urf), current ripple factor (Irf), current integration (Ih), power integration (WP), voltage peak (Upk), current peak (Ipk)
 Harmonic measurement: Harmonic active power, select calculation order \nfrom 2nd order to 100th order
 Waveform recording: Voltage and current waveforms/ Motor pulse: Always 5 MS/s \nMotor waveforms: Always 50 kS/s, 16 bits \nRecording capacity: 1 Mword × ((voltage + current) × number of channels + motor \nwaveforms)
 Motor analysis (PW6001-11 to -16 only): Voltage, Torque, Rotation, Frequency, Slip, or Motor output
Measurement rangeVoltage range: 6 to 1500 V, 8 ranges \nCurrent range (Probe 1) : 400 mA to 1 kA (depends on current sensor) \nCurrent range (Probe 2) : 100 mA to 50 kA (depends on current sensor) \nPower range: 2.40000W to 4.50000MW (depends on combination of voltage and current range) \nFrequency range: 0.1 Hz to 2 MHz
Basic accuracyVoltage: ±0.02 % rdg. ±0.02 % f.s. \nCurrent: ±0.02 % rdg. ±0.02 % f.s. \nActive power: ±0.02 % rdg. ±0.03 % f.s.
Synchronization frequency rangePower measurement: 0.1 Hz to 2 MHz \nHarmonic measurement: 45 Hz to 66 Hz (IEC standard mode), 0.1 Hz to 300 kHz (Wideband mode)
Frequency bandDC, 0.1 Hz to 2 MHz
Data update ratePower measurement: 10 ms/ 50 ms/ 200 ms \nHarmonic measurement: 200 ms (IEC standard mode), 50 ms (Wideband mode
Data save intervalOFF, 10 msec to 500 msec, 1 sec to 30 sec, 1 minute to 60 minutes \nUser-selected from all measured values, including harmonic measured values, \nSpecified measured values can be saved in internal memory or USB flash drive
External interfacesUSB (memory), LAN, GP-IB, RS-232C (for communication/LR8410 link), External control ,Synchronization control
Logger connectivitySends measured values wirelessly to logger by using a Bluetooth® wireless technology serial conversion adapter. (Supported devices: Hioki LR8410 Link-compatible loggers), Ver. 2.0 and later
Power supply100 to 240 V AC, 50/60 Hz, 200 VA max
Dimensions and mass430 mm (16.93 in)W × 177 mm (6.97 in)H × 450 mm (17.72 in)D, 14 kg (49.4 oz) (PW6001-16)
Included accessoriesInstruction Manual ×1, Power cord ×1, D-sub connector × 1 (PW6001-1x only)


For more information: Hioki