Kikusui TOS9311 Electrical Safety Multi-analyzer
Brug vores chat til personlig support. Eller kontakt os via +45 31 33 18 19 eller Salg@GOmeasure.dk
- Selv højspændingsmodeller kan gennemføre flere tests. ACW/DCW/IR -test kan alle udføres med en enhed.
- AC Modstår spændingstest: Maksimal anvendt spænding: 10 kV/50mA
- DC modsat spændingstest: Maksimal påført spænding: 5 kV/20MA, 10 kV/10MA (100W)
- Isoleringsmodstandstestmålingsområde: 0,001MΩ til 100,0 gΩ (DC -25V til -1.000V / DC +50V til +10.000V)
- Modstanden spændingstest understøtter hurtig NG (ingen god) dom: Detektionsfølsomhed kan indstilles i 5 niveauer
- LAN/USB/RS232C Standard udstyret
- Har en meget synlig farve LCD -skærm, der viser måleværdier og standardoplysninger for hver test.
Oplev mulighederne
Mere information
Beskrivelse
The TOS9300 series is a high-performance electrical safety analyzer that complies with a wide range of universal standards. Hipot, Insulation Resistance, Ground Bond, Leakage Current (touch current and protective conductor current) and partial discharge can all be tested. A total of 6 models are available for standard compliance tests for a wide variety of applications including R&D, quality assurance manufacturing lines and laboratory tests.
Color LCD Screen for Improved Visibility!
A brand-new, 7-inch LCD display allows for easy access to your custom settings, standard outlines and blueprints for easy operation.
User-Friendly, 10-Key Configuration
The TOS9300 series has included a user-friendly keypad in addition to the basic rotary knob for easy configuration setting. The front panel USB interface also allows for direct control via keyboard*.
LAN/USB/RS232C Standard Digital Interface
LXI compatible LAN, USB 2.0, USB-TMC compatible USB, and RS232C as standard digital interface.
I/V Monitor Terminal (Analog Monitor)
Signal outputs on the rear panel I/V terminal allow the user to monitor current/voltage waveforms during hipot tests with only an oscilloscope. Current sensors and high-voltage probes are not required.
STATUS OUT Connector
Signals from the rear panel STATUS connector automatically activate the optional warning light (PL02-TOS) during high voltage output or unsafe test conditions.
SIGNAL I/O Connector
The rear panel also has a SIGNAL I/O that can start/stop operation as well as output signals.
Dokumenter
Datasheet:
Muligheder
Video
The TOS9300 series is a high-performance electrical safety analyzer that complies with a wide range of universal standards. Hipot, Insulation Resistance, Ground Bond, Leakage Current (touch current and protective conductor current) and partial discharge can all be tested. A total of 6 models are available for standard compliance tests for a wide variety of applications including R&D, quality assurance manufacturing lines and laboratory tests.
Color LCD Screen for Improved Visibility!
A brand-new, 7-inch LCD display allows for easy access to your custom settings, standard outlines and blueprints for easy operation.
User-Friendly, 10-Key Configuration
The TOS9300 series has included a user-friendly keypad in addition to the basic rotary knob for easy configuration setting. The front panel USB interface also allows for direct control via keyboard*.
LAN/USB/RS232C Standard Digital Interface
LXI compatible LAN, USB 2.0, USB-TMC compatible USB, and RS232C as standard digital interface.
I/V Monitor Terminal (Analog Monitor)
Signal outputs on the rear panel I/V terminal allow the user to monitor current/voltage waveforms during hipot tests with only an oscilloscope. Current sensors and high-voltage probes are not required.
STATUS OUT Connector
Signals from the rear panel STATUS connector automatically activate the optional warning light (PL02-TOS) during high voltage output or unsafe test conditions.
SIGNAL I/O Connector
The rear panel also has a SIGNAL I/O that can start/stop operation as well as output signals.