EA PSI 10060-120 2U 3000W Lab Power Supply
Brug vores chat til personlig support eller kontakt os via +45 31 33 18 19 eller salg@GOmeasure.dk
- Housing: 19" rack
- Voltage (U): 60.00
- Current (I) Ampere: 120.00
- Power (P) Watt: 3000.00
:%2060.00%0ACurrent%20(I)%20Ampere:%20120.00%0APower%20(P)%20Watt:%203000.00%0A
){kind=link}
Opdag mulighederne
Mere information
Beskrivelse
The DC laboratory power supplies in the PSI 10000 series from EA Elektro-Automatik convert the energy from the grid into a regulated DC voltage with an efficiency of over 96%. The PSI 10000 series includes single and three phase units, which, together with the wide input range, allows use with practically all global mains voltages. The DC voltage and current ratings are determined by typical applications and the spectrum ranges from 0 - 60 V to 0 - 2000 V and from 0 - 6 A up to 0 - 1000 A in a single device. The DC supply operates as a flexible output stage with a constant power characteristic (autoranging) and a wide voltage and current range.
To achieve higher power and current all units are equipped with a master-slave bus. This enables up to 64 parallel con-nected devices to be combined into one system which can provide up to 1920 kW and 64000 A. Such a system works as a single unit and can use different power classes, only the voltage class must remain constant. In this way a user can construct a 75 kW system from two 30 kW 4U and one 15 kW 3U device from the PSI 10000 range.
Furthermore, typical laboratory functionality is provided. This includes an extensive function generator, alarm and warning management, various optional industrial interfac-es, software solutions and many more functions.
Features
- Wide range input: 110 V - 240 V, +10%, 1ph AC Active Power-Factor-Correction, typical 0.99
- Very high efficiency of up to 95%
- Voltages from 0 - 60 V up to 0 - 1500 V
- Currents from 0 - 6 A up to 0 - 120 A
- Flexible power regulated DC output stages (autoranging)
- Regulation mode CV, CC, CP, CR with fast crossover Digital regulation, high resolution with 16bit ADCs and DACs, selection of voltage regulation speed: Normal, Fast, Slow
- Color 5“ TFT display with touch control and intuitive user interface
- Galvanically isolated Share bus for parallel operation of all power classes in the 10000 series
- Master-slave bus for parallel operation of up to 64 units of all power classes in the 10000 series
- Integrated function generator with predefined curves
- Automotive test procedures for LV123, LV124 and LV148
- Photovoltaics test mode (EN 50530), fuel cell simula- tion
- Command languages and drivers: SCPI and ModBus, LabVIEW, IVI
AC connection
The DC power supplies in the PSI 10000 series are equipped with an active PFC which provides a high efficiency at a low energy consumption. Furthermore, the devices in this series provide a wide input voltage range. It reaches from 110/120 V up to 240 V with 1-phase models and from 208 V to 380/400/480 V with 3-phase models. Hence the devices can be operated in the majority of global grids. They adjust automatically, without additional configuration, to the avail-able grid voltage. In a 110/120 V and 208 V AC grid a derat-ing of the DC output power is automatically set.
DC output
The DC output of the power supply series PSI 10000 2U is rated for DC voltages of 0 - 60 V up to 0 - 1500 V and cur-rents of 0 - 6 A up to 0 - 120 A. The flexible output stages (autoranging) provide the user with a wide voltage, current and power range and hence a wider field of working than traditional power supplies.
DC connection
Connection of the DC output is done via copper blades on the back side of the device. If a system with higher perfor-mance is required, the devices are simply connected in par-allel. With minimal effort devices can be linked with the ver-tical copper rails. A cover for contact protection is provided.
The principle of autoranging
„Autoranging“ is a term used when a programmable DC power supply automatically offers a wider output range of both, voltage and current, to maintain full power across a wide operation range. This type of solution allows the use of a single unit to address multiple voltage and current com-binations.
Function generator
All models in the PSI 10000 series are equipped with a func-tion generator. This allows waveforms such as sine, trian-gle, square or trapezoid to be simply called up and applied to either the voltage or the current. A ramp function and a arbitrary generator allow voltage and current progression to be freely programmable. Test sequences for repeated tests can be saved and reloaded when needed, which saves time. For simulation of a photovoltaics system or fuel cells, adapt-able tables are provided. With the integrated and adjustable PV characteristics curve DIN EN 50530 various solar mod-ules can be defined and entire day trend progression can be simulated.
Conclusion: the user is supported by a multitude of useful functions.
Interfaces
As standard, 10000s series devices are fitted with the most important interfaces and ports which are all galvanically isolated from the DC input. There is an analog interface which can be parameterized for input and output, control and monitoring, of 0 - 5 V or 0 - 10 V for voltage, current, power and resistance, assorted inputs and outputs as well as USB and Ethernet ports. Further optional industrial inter-face for plug & play slot complete the portfolio:
- CAN
- CANopen
- RS232
- Profibus
- EtherCAT
- Profinet, with one or two ports
- Modbus, with one or two ports
- Ethernet, with one or two ports
High performance systems
High power applications can be covered with high pow-er systems of up to 192 kW. These are achieved by using the outputs of many PSI 10000 2U devices and connect-ing them in parallel using copper rails. A 19” cabinet with a height of 42U can hold up to 16 units of 2U and thus form a system of up to 48 kW occupying only 0.6 m² (6.5 sqft) of floor space. The master/slave bus allows for up to 6 cabi-nets with a maximum of 64 units and up to 3 kW each to behave as one unit.
Master-slave bus and Share bus
When the integrated master-slave bus and Share bus are used, a multi device system behaves as a single device. The buses are simply connected between each device. With the master-slave bus the system data, such as total power and total current, are collected and displayed on the master unit. Warnings and alarms of the slave devices are also clearly displayed. The Share bus cares for a balanced load distribu-tion between the individual units.
Specifikationer
Dokumenter
Muligheder
Video
The DC laboratory power supplies in the PSI 10000 series from EA Elektro-Automatik convert the energy from the grid into a regulated DC voltage with an efficiency of over 96%. The PSI 10000 series includes single and three phase units, which, together with the wide input range, allows use with practically all global mains voltages. The DC voltage and current ratings are determined by typical applications and the spectrum ranges from 0 - 60 V to 0 - 2000 V and from 0 - 6 A up to 0 - 1000 A in a single device. The DC supply operates as a flexible output stage with a constant power characteristic (autoranging) and a wide voltage and current range.
To achieve higher power and current all units are equipped with a master-slave bus. This enables up to 64 parallel con-nected devices to be combined into one system which can provide up to 1920 kW and 64000 A. Such a system works as a single unit and can use different power classes, only the voltage class must remain constant. In this way a user can construct a 75 kW system from two 30 kW 4U and one 15 kW 3U device from the PSI 10000 range.
Furthermore, typical laboratory functionality is provided. This includes an extensive function generator, alarm and warning management, various optional industrial interfac-es, software solutions and many more functions.
Features
- Wide range input: 110 V - 240 V, +10%, 1ph AC Active Power-Factor-Correction, typical 0.99
- Very high efficiency of up to 95%
- Voltages from 0 - 60 V up to 0 - 1500 V
- Currents from 0 - 6 A up to 0 - 120 A
- Flexible power regulated DC output stages (autoranging)
- Regulation mode CV, CC, CP, CR with fast crossover Digital regulation, high resolution with 16bit ADCs and DACs, selection of voltage regulation speed: Normal, Fast, Slow
- Color 5“ TFT display with touch control and intuitive user interface
- Galvanically isolated Share bus for parallel operation of all power classes in the 10000 series
- Master-slave bus for parallel operation of up to 64 units of all power classes in the 10000 series
- Integrated function generator with predefined curves
- Automotive test procedures for LV123, LV124 and LV148
- Photovoltaics test mode (EN 50530), fuel cell simula- tion
- Command languages and drivers: SCPI and ModBus, LabVIEW, IVI
AC connection
The DC power supplies in the PSI 10000 series are equipped with an active PFC which provides a high efficiency at a low energy consumption. Furthermore, the devices in this series provide a wide input voltage range. It reaches from 110/120 V up to 240 V with 1-phase models and from 208 V to 380/400/480 V with 3-phase models. Hence the devices can be operated in the majority of global grids. They adjust automatically, without additional configuration, to the avail-able grid voltage. In a 110/120 V and 208 V AC grid a derat-ing of the DC output power is automatically set.
DC output
The DC output of the power supply series PSI 10000 2U is rated for DC voltages of 0 - 60 V up to 0 - 1500 V and cur-rents of 0 - 6 A up to 0 - 120 A. The flexible output stages (autoranging) provide the user with a wide voltage, current and power range and hence a wider field of working than traditional power supplies.
DC connection
Connection of the DC output is done via copper blades on the back side of the device. If a system with higher perfor-mance is required, the devices are simply connected in par-allel. With minimal effort devices can be linked with the ver-tical copper rails. A cover for contact protection is provided.
The principle of autoranging
„Autoranging“ is a term used when a programmable DC power supply automatically offers a wider output range of both, voltage and current, to maintain full power across a wide operation range. This type of solution allows the use of a single unit to address multiple voltage and current com-binations.
Function generator
All models in the PSI 10000 series are equipped with a func-tion generator. This allows waveforms such as sine, trian-gle, square or trapezoid to be simply called up and applied to either the voltage or the current. A ramp function and a arbitrary generator allow voltage and current progression to be freely programmable. Test sequences for repeated tests can be saved and reloaded when needed, which saves time. For simulation of a photovoltaics system or fuel cells, adapt-able tables are provided. With the integrated and adjustable PV characteristics curve DIN EN 50530 various solar mod-ules can be defined and entire day trend progression can be simulated.
Conclusion: the user is supported by a multitude of useful functions.
Interfaces
As standard, 10000s series devices are fitted with the most important interfaces and ports which are all galvanically isolated from the DC input. There is an analog interface which can be parameterized for input and output, control and monitoring, of 0 - 5 V or 0 - 10 V for voltage, current, power and resistance, assorted inputs and outputs as well as USB and Ethernet ports. Further optional industrial inter-face for plug & play slot complete the portfolio:
- CAN
- CANopen
- RS232
- Profibus
- EtherCAT
- Profinet, with one or two ports
- Modbus, with one or two ports
- Ethernet, with one or two ports
High performance systems
High power applications can be covered with high pow-er systems of up to 192 kW. These are achieved by using the outputs of many PSI 10000 2U devices and connect-ing them in parallel using copper rails. A 19” cabinet with a height of 42U can hold up to 16 units of 2U and thus form a system of up to 48 kW occupying only 0.6 m² (6.5 sqft) of floor space. The master/slave bus allows for up to 6 cabi-nets with a maximum of 64 units and up to 3 kW each to behave as one unit.
Master-slave bus and Share bus
When the integrated master-slave bus and Share bus are used, a multi device system behaves as a single device. The buses are simply connected between each device. With the master-slave bus the system data, such as total power and total current, are collected and displayed on the master unit. Warnings and alarms of the slave devices are also clearly displayed. The Share bus cares for a balanced load distribu-tion between the individual units.