+45 31 33 18 19
salg@GOmeasure.dk

Hioki CT7636 AC/DC Current Sensor

Hioki CT7636 AC/DC Current Sensor

2.990,00 kr.

  • AC/DC Current Sensor
  • DC to 10kHz (-3dB)
  • 600A AC/DC
  • +/-1.8% deg. phase accuracy
  • 33 mm core diameter
  • 2.5m cord length
  • PL14 terminal
SKU: CT7636 Categories: , Tag:

Hioki CT7636 AC/DC Current Sensor

Hioki clamp on meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The CT7636 is a 600 A AC/DC Current Sensor that pairs with the detachable Display Unit CM7290 or CM7291 to capture instantaneous waveforms that can be output to a Hioki memory recorder or logger for further analysis.

CAT IV 600 V

Key Features

  • Ideal for observing instantaneous waveforms in laboratories and other temperature-controlled environments
  • Ideal for site inspections by using detachable Display Unit
  • Four output formats to output data to loggers or other devices (via Display Unit): WAVE, RMS, PEAK, Hz

Basic specifications

Accuracy guaranteed: 3 years
Rated measurement current 600 A AC/DC
Max. measurement current 600 A
(requires derating at frequency)
Max. allowable peak input 900 A peak
Bandwidth DC to 10 kHz (-3dB)
(When used in combination with CM7290 or CM7291: DC 3 Hz to 1 kHz)
Typical phase accuracy ±1.8 deg. (DC < f ≤ 66 Hz)
Output rate 1 mV/A
Max. rated voltage to earth AC/DC 600 V (CAT IV)
AC/DC 1000 V (CAT III)
Core diameter φ 33 mm (1.30 in) or less
Output connectors HIOKI PL 14
Operating temperature range -25°C to 65°C (-13°F to 149°F)
Dimensions and mass 64 mm (2.52 in)W × 160 mm (6.30 in)H × 34 mm (1.34 in)D, 320 g (11.3 oz), Cable length 2.5 m (8.20 ft)
Included accessories None

Connect to Recorders, Data loggers, and Oscilloscopes

Must be paired with the Display Unit CM7290 or CM7291 to operate as a standalone unit. Add an output cord to deliver signals to a data logger or Memory HiCorder for the following types of output:

  • A DC or AC (up to 5 kHz/10 kHz) current waveform as-is (using WAVE mode for waveform output)
  • An analog signal generated by converting the input waveform to a series of RMS values (using RMS mode for RMS output)
  • An analog signal generated by detecting the current waveform’s peak value (using PEAK mode for peak output
  • An analog waveform generated by detecting the frequency of the current waveform (using FREQ mode for frequency output)

Hioki CT7631

Broad temperature range

A wide operating temperature range of -25°C to 65°C (-13°F to 149°F)lets you use the sensor even in sub-freezing temperatures and on hot summer days.

Hioki CT7631

Transfer data wirelessly using Bluetooth(R) to GENNECT Cross mobile app

Pair with the CM7291 Display Unit to send measurement data to a smartphone or tablet using Bluetooth® wireless technology. Use the GENNECT Cross dedicated app to display and review measured values and waveforms in real time.

Hioki CT7631

For more information: Hioki

Hioki CT7636 Current Sensor

Hioki CT7636 Datasheet

Additional information

Producent

Hioki

Produktkategori

Oscilloscope Probes

This website uses cookies. By continuing to use this site, you accept our use of cookies.  Learn more