Tektronix MDO3024 200 MHz Oscilloscope

Tektronix MDO3024
200 MHz Oscilloscope

DKK32.400

Mixed Domain Oscilloscope with (4) 200 MHz analog channels, and (1) 200 MHz spectrum analyzer input

It is the ultimate 6-in-1 integrated oscilloscope that includes an integrated spectrum analyzer, arbitrary function generator, logic analyzer, protocol analyzer, and digital voltmeter/counter. The MDO3000 is completely customizable and fully upgradeable. Add the instruments and performance you need now – or later.

Tektronix MDO3024 200 MHz Oscilloscope

MDO3024 Key performance specifications
1. Oscilloscope
2 and 4 analog channel models
1 GHz, 500 MHz, 350 MHz, 200 MHz, 100 MHz bandwidth models
Bandwidth is upgradable (up to 1 GHz)
Up to 5 GS/s sample rate
10 M record length on all channels
>280,000 wfm/s maximum waveform capture rate
Standard passive voltage probes with 3.9 pF capacitive loading and 1 GHz, 500 MHz, or 250 MHz analog bandwidth

2. Spectrum Analyzer
Frequency range
Standard: 9 kHz – oscilloscope bandwidth
Optional: 9 kHz – 3 GHz
Ultra-wide capture bandwidth up to 3 GHz

3. Arbitrary Function Generator (Optional)
13 predefined waveform types
50 MHz waveform generation
128 k arbitrary generator record length
250 MS/s arbitrary generator sample rate

4. Logic Analyzer (Optional)
16 digital channels
10 M record length on all channels
121.2 ps timing resolution

5. Protocol Analyzer (Optional)
Serial bus support for I2C, SPI, RS-232/422/485/UART, USB 2.0, CAN, CAN FD, LIN, FlexRay, MIL-STD-1553, and Audio standards

6. Digital Voltmeter / Frequency Counter (Free with product registration)
4-digit AC RMS, DC, and AC+DC RMS voltage measurements
5-digit frequency measurements

Tektronix MDO3024 200 MHz Oscilloscope

Tektronix MDO3024 Datasheet

Tektronix MDO3024 200 MHz Oscilloscope

MDO3AFG Arbitrary function generator with 13 predefined waveforms and arbitrary waveform generation

MDO3MSO 16 digital channels; includes P6316 digital probe and accessories

MDO3SA Increase spectrum analyzer input frequency range to 9 kHz – 3 GHz and capture bandwidth to 3 GHz

MDO3SEC Enhanced instrument security to enable password protected control of turning on/off all instrument ports and instrument firmware update functionality

MDO3BND Application module that enables all of the functionality of the MDO3AERO, MDO3AUDIO, MDO3AUTO, MDO3COMP, MDO3EMBD, MDO3FLEX, MDO3LMT, MDO3PWR and MDO3USB application modules in a single module. Save money when multiple serial bus debug and analysis application modules are required and easily move the entire set of functionality from one instrument to another.

MDO3AERO Aerospace Serial Triggering and Analysis Module. Enables triggering on packet-level information on MIL-STD-1553 buses as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time- stamp information.
Signal Inputs – Any Ch1 – Ch4, Math, Ref1 – Ref4

Recommended Probing – Differential or single ended (only one single-ended signal required)

MDO3AUDIO Audio Serial Triggering and Analysis Module. Enables triggering on packet-level information on I2S, LJ, RJ, and TDM audio buses as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time-stamp information.
Signal Inputs – Any Ch1 – Ch4, any D0 – D15

Recommended Probing – Single ended

MDO3AUTO Automotive Serial Triggering and Analysis Module. Enables triggering on packet-level information on CAN, CAN FD (ISO and non-ISO), and LIN buses as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time- stamp information.
Signal Inputs – CAN, CAN FD, or LIN: Any Ch1 – Ch4, any D0 – D15

Recommended Probing – CAN, CAN FD: Single ended or differential; LIN: Single ended

MDO3COMP Computer Serial Triggering and Analysis Module. Enables triggering on packet-level information on RS-232/422/485/UART buses as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time-stamp information.
Signal Inputs – Any Ch1 – Ch4, any D0 – D15

Recommended Probing – RS-232/UART: Single ended; RS-422/485: Differential

MDO3EMBD Embedded Serial Triggering and Analysis Module. Enables triggering on packet-level information on I2C and SPI buses as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time- stamp information.
Signal Inputs – I2C or SPI: Any Ch1 – Ch4, any D0 – D15

Recommended Probing – Single ended

MDO3FLEX FlexRay Serial Triggering and Analysis Module. Enables triggering on packet-level information on FlexRay buses as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, packet decode tables with time-stamp information.
Signal Inputs – Any Ch1 – Ch4 (and any D0 – D15 when MDO3MSO option is installed; single-ended probing only)

Recommended Probing – Single ended or differential

MDO3USB USB Serial Triggering and Analysis Module. Enables triggering on packet-level content for low-speed, and full-speed USB serial buses. Also enables analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time-stamp information for low-speed, full-speed, and high-speed USB serial buses.
Signal Inputs – Low-speed and Full-speed: Any Ch1 – Ch4, any D0 – D15; Low-speed, Full-speed, and High-speed: Any Ch1 – Ch4, Math, Ref1 – Ref4

Note: High-speed decode support only available on 1 GHz models.

Recommended Probing – Low-speed and Full-speed: Single ended or differential; High-speed: Differential

MDO3PWR Power Analysis Application Module. Enables quick and accurate analysis of power quality, switching loss, harmonics, safe operating area (SOA), modulation, ripple, and slew rate (dI/dt, dV/dt)
MDO3LMT Limit and Mask Testing Application Module. Enables testing against limit templates generated from “golden” waveforms and mask testing using custom masks

Probes

TPP0250 250 MHz, 10X TekVPI® passive voltage probe with 3.9 pF input capacitance

TPP0500B 500 MHz, 10X TekVPI® passive voltage probe with 3.9 pF input capacitance

TPP0502 500 MHz, 2X TekVPI® passive voltage probe with 12.7 pF input capacitance

TPP0850 2.5 kV, 800 MHz, 50X TekVPI® passive high-voltage probe

TPP1000 1 GHz, 10X TekVPI® passive voltage probe with 3.9 pF input capacitance

TAP1500 1.5 GHz TekVPI® active single-ended voltage probe

TAP2500 2.5 GHz TekVPI® active single-ended voltage probe

TAP3500 3.5 GHz TekVPI® active single-ended voltage probe

TCP0020 50 MHz TekVPI® 20 Ampere AC/DC current probe

TCP0030A 120 MHz TekVPI® 30 Ampere AC/DC current probe

TCP0150 20 MHz TekVPI® 150 Ampere AC/DC current probe

TDP0500 500 MHz TekVPI® differential voltage probe with ±42 V differential input voltage

TDP1000 1 GHz TekVPI® differential voltage probe with ±42 V differential input voltage

TDP1500 1.5 GHz TekVPI® differential voltage probe with ±8.5 V differential input voltage

TDP3500 3.5 GHz TekVPI® differential voltage probe with ±2 V differential input voltage

THDP0200 ±1.5 kV, 200 MHz TekVPI® high-voltage differential probe

THDP0100 ±6 kV, 100 MHz TekVPI® high-voltage differential probe

TMDP0200 ±750 V, 200 MHz TekVPI® high-voltage differential probe

Accessories

TPA-N-PRE
Preamplifier, 12 dB nominal Gain, 9 kHz – 6 GHz
TPA-N-VPI
N-to-TekVPI adapter
119-4146-00 
Near field probe set, 100 kHz – 1 GHz
119-6609-00 
Flexible monopole antenna
077-0981-xx
Service manual (English only)
TPA-BNC
TekVPI® to TekProbe™ BNC adapter
TEK-DPG
TekVPI Deskew pulse generator signal source
067-1686-xx
Power measurement deskew and calibration fixture
SignalVu-PC-SVE
Vector Signal Analysis Software
TEK-USB-488 
GPIB-to-USB adapter
ACD3000
Soft transit case (includes front protective cover)
HCTEK4321
Hard transit case (requires ACD3000)
RMD3000
Rackmount kit
200-5052-00 
Front protective cover