EM TEST VSS500N15.1
Voltage surge simulator

VSS500N15.1 Voltage Surge Simulator with 0.5J constant energy

  • Test pulse 1.2/50µs up to 15kV as per EN/IEC 60255-27
  • 7 different test levels
  • Source impedance 500 ohm
  • Constant energy of 0.5J at each test level
  • Peak voltage measurement

EM TEST VSS500N15.1 Voltage surge simulation

The surge simulator type VSS500N15.1 generates high voltage transients as required by IEC 60255-27 with a source impedance of 500ohm for transient overvoltage tests on “Protection Relays”. The output voltage ranges up to 15kV, divided into two voltage ranges (up to 6.6kV and up to 15kV).
The no-load waveshape corresponds to IEC-61180-1. For this kind of testing the IEC 60255-27 standard requires a fixed energy of 0.5J at each test level.

EM TEST VSS500N15.1 Voltage surge simulation

EM TEST VSS500N15.1 Datasheet